Provins Sirock Technology Site

Archive for June, 2011

A basic locking cabinet can secure valuable papers or personal items but it will not protect them from theft or fire damage. Only safes can provide a superior level of protection for documents, jewelry, guns and personal items. computer data that would be difficult or impossible to duplicate if lost.

While paper records secured within a fire-rated safe can withstand temperatures up to 350 degrees Fahrenheit, computer media is damaged beyond use by temperatures above 125 degrees and 80% humidity. Microfiche film, tapes, diskettes, CDs, DVDs and computer media require the added protection of a data media safe.

Data Media Safes are specifically designed for data media storage. Protect against fire and climactic changes–a requirement for a small business or home office. A data media safe must keep the internal temperature below 125º and the humidity level below 85%. Several fire testing laboratories have tested our safes at a temperature of 1,832 degrees F for over one hour with internal temperatures remaining below 122 degrees F. The safes were awarded the one-hour label. In addition, the safes are manufactured under ISO 9002 quality standard requirements.
Read the rest of this entry »

To pass the CCNA exam, you’ve got to know the role of the bandwidth command with IGRP and EIGRP and when to use it. In this tutorial, we’ll configure IGRP over a frame relay hub-and-spoke network using the following networks:

R1 (the hub), R2, and R3 are running IGRP over the 172.12.123.0 /24 network. This is a T1 line.

R1 and R3 are also connected on a different subnet, 172.12.13.0 /24. The bandwidth of this connection is 512 KBPS.

R2 and R3 are also connected by an Ethernet segment, 172.23.0.0 /16.

We’ll configure IGRP on R1, R2, and R3 with the router igrp 1 command. IGRP will run on all interfaces in the 172.12.0.0 and 172.23.0.0 network.

R1#conf t

R1(config)#router igrp 1

R1(config-router)#network 172.12.0.0

The “1” in the router igrp command refers to the Autonomous System (AS). IGRP is a classful routing protocol, so wildcard masks are not used in the network statements.

R2#conf t

R2(config-if)#router igrp 1

R2(config-router)#network 172.12.0.0

R2(config-router)#network 172.23.0.0

R3#conf t

R3(config-if)#router igrp 1

R3(config-router)#network 172.12.0.0

R3(config-router)#network 172.23.0.0

Run show ip route on R1. R1 will see three equal-cost paths to the Ethernet network. IGRP supports load-sharing over up to four equal-cost paths by default, so all three paths appear in the routing table. R1 will also see a route to the loopback address on R2 and two routes to the loopback address on R3. (You can also run show ip route igrp in order to see only the IGRP routes.)
Read the rest of this entry »

Iphones haven’t been on the market all that long and already they are becoming one of the most popular must have gadgets around. One of the questions on many Iphone owners’ lips’ is how to get music onto their Iphone. If you’re familiar with Ipods you may already know how this is done, but if not, read on to find out how to get some music on your Iphone.

In order to download music to your Iphone, there are a few things you will need-

1-A computer-age and specifications shouldn’t matter, as long as it’s newer than say 6 or 7 years. You’ll also need enough free space on the computer’s hard drive.
2-An internet connection. Speed isn’t an issue, you will however be better off with the fastest connection you can find though, as if you are still stuck on dial up or something it can take a while to download the files you want.
3-You’ll also need the USB lead that came with the Iphone to connect it to the computer. At this stage it’s not yet possible to download songs directly from the internet to the Iphone, so you will need to save them to your computer first.

The last thing is the trickiest-somewhere to download the music from!

The first thing you will need to know is to avoid the torrent sites-they are also known as P2P or peer to peer sites. Using these sites may result in you having criminal proceedings brought against you, as they are illegal, and it can also result in your computer being damaged beyond repair by malware and trojans etc that may be embedded in your downloads.
Read the rest of this entry »

CS2 photo shop tutorials can be very tedious. Sometimes you may find yourself confronted with one too many CS2 photo shop tutorials, and you may feel like it is too much of an effort and you’d rather do away it. However, if confronted with the advantages that CS2 photo shop tutorials can provide, you will find that it is really worth all the effort, time and energy investing upon. CS photo shop tutorials can be free or paid, and there are various mediums by which it is being carried out. You have the option of video tutorials, reading materials and direct demonstration, but all these collectively provide a host of benefits that you will not find elsewhere. You can also customize your CS2 photo shop training topics without any hassles.

Value for Money (or sometimes no money is needed at all!)
CS2 photo shop tutorials are reasonably priced considering that you will get the very much-needed information to enable you to maximize your use of Adobe CS2. CS2 can be very difficult to get used to, and for minimal fees, you will find yourself easily getting comfortable with the software through the well-divided categories of the CS2 photo shop tutorials.CS2 photo shop tutorials are usually made in such a way that makes up for gradual and complete learning.

No Stone Remains Unturned
When you are engaged in a CS2 photo shop tutorial, you will almost always be assured of mastery. No details will be left out or missed. If you do self-study CS2, you may gain the skills needed but you may find yourself missing out on other important details, commands, shortcuts and concepts. Finishing a CS2 photo shop tutorial ensures that you get to learn everything there is to learn from CS2.
Read the rest of this entry »